Dry Chemical Fire Extinguisher

CHARACTERISTICS OF COMPONENTS

EXTINGUISHING AGENT

ABC Dry Chemical Powder 40% MAP by Megavit S.r.l.

This type of powder is able to extinguish the following

Classed of fire:

A= Solid material as wood, textiles, rubber, etc.

B= Flammable liquids as petrol, etc.

C= Flammable gases as methane, propane, etc.

Can be used on live electrical equipment.

Dry Powder is not corrosive, not abrasive, non toxic for humans and Animals

CYLINDER

Machine, internal chemical cleaning.

Deeply sandblasted and painted with high resistance epoxy powder for all climate conditions.

VALVE TYPE VP6B/VP62-CE

Brass made P.CuZn40Pb2, squeeze lever type.

Complete with safety valve spring release at 22-24 Bar, brass made safety pin with seal.

Provided with safely pressure release device during accidental unscrewing from cylinder neck ring

MANOMETER

High precision manometer with internal mechanism fully made in brass.

Dial with green field for working pressure and red field for under and Overpressure.

DISCHARGE HOSE

Made by reinforced rubber with plaited textile reinforcement, complete with galvanized brass nozzle and galvanized brass fitting, automatically clampled.

Work pressure 18 bar, test pressure 36 bar and burst pressure 54 bar.

HOW TO USE

This fire extinguisher can be used against A, B and C Classes of Fire of medium dimensions indoors or outdoors.

Pick up extinguisher, pull out safety pin, press upper lever, aim at fire base and sweep with hose.

MAINTENANCE

Inspect monthly if the manometer needle is in the green sector.

Check obstruction into the nozzle and into the hose, if any clean them with compressed air. Check if Pin and Seal are intect.

Even after partial use the fire extinguisher mest be refilled.